Just another WordPress site

The Water Damage Restoration Process

Water damage restoration is a complicated task that requires a number of techniques and equipment so that you can ensure that the work is properly done. Depending on size and scale of the emergency, different measures are taken in order to remove the normal water and remediate any contaminated places. Today, we will continue from our previous document and go over the various things that are usually done on a water damage job along with the scope of the gear used.
The fundamental steps to any water damage restoration job can be divided as follows:
* Flood Water Removal
* Moisture Mapping
* Mold Inspection and Removal
* Water Drying Techniques
Flood Water Removal
Removing the foundation of the water is the first important phase on any water damage restoration. Professional technicians must have a variety of equipment offered by their disposal if they arrive on the scene. Normally, portable submergible water pumps are accustomed to pump out normal water accumulation in structures. These pumps own a higher threshold for extracting water and can usually dry out a whole submerged area very quickly, which is necessary to stop the harm from spreading.
mold removal
Moisture Mapping
Wetness mapping involves using detection tools in order to get an approximate map for the moisture values on your own property. Infrared is among the more common methods used to obtain accurate readings, and correctly trained technicians commonly take high-quality digital photos as well to assess the extent of the damage. This step is crucial to get an idea of how bad the water damage could be also to take preliminary steps to avoid mold growth.
Mold Inspection and Removal
Residual water can lead to mold damage if unaddressed. Water damage professionals will use special detergents that sterilize the region and make conditions unfavorable for mold growth. Furthermore, some restoration firms may use deodorization and ventilation as part of the process to get rid of any lingering odors and airborne contaminants.
Water Drying Techniques
These are many of the most common water drying techniques utilized by IICRC-certified professionals. Each technique is used in line with the severity of the situation.
Air Movers
Also known as evaporators, air flow movers help the drying procedure by controlling humidity in an area and promote circulation of atmosphere. This can help on a broad level by detatching liquids from porous materials – floor covering, wood, drywall, plaster and much more – leaving the more challenging trying to specialized equipment.
Dehumidifiers / Desiccant Dehumidification
Dehumidifiers remove the moisture from the air so lingering water in your community can be extracted from the area. These can be categorized broadly under refrigerant dehumidifiers and desiccant dehumidifiers.
Refrigerant dehumidifiers work under the principle of cooling the encompassing air. When this happens, the air loses its ability to retain water, triggering condensation upon the cooling coils of the equipment. High-grade dehumidifiers work like a powerful version of client dehumidifiers, rapidly pulling the surplus moisture from the air.
Desiccant dehumidifiers don’t need cooling to eliminate water; instead, they use products that naturally absorb moisture. When applied on a large scale, these machines can quickly extract humidity from the oxygen in as effective a manner as refrigerants. The sort of equipment uses depends on the company you hire and the circumstances of the restoration job.
Additional equipment specific to the homeowner’s region could be utilized, with regards to the size of the restoration firm. Each water damage job is totally unique and requires proper research of the problem at hand to apply the proper equipment and techniques for removing water as quickly as possible.

Leave a Reply

Your email address will not be published. Required fields are marked *